VCarve Pro keyboard shortcuts

Learning these shortcuts can save you a lot of time in the long run. Are you searching for the VCarve Pro Keyboard Shortcuts?

If you’re interested in VCarve Pro Keyboard Shortcuts this is the right place for you. There are many keyboard shortcuts that can save you time and energy when you are working on VCarve Pro.

Ctrl+ASelect All vectors
EscDeselect All vectors
NToggles between Selection and Node Editing modes
EscSwitches to Selection Mode (exits Node editing or Transform mode)
TOpens the Scale form for Transforming the vectors
MOpens the Move form
ROpens the Rotate form
JOpens the Join Vectors form
Ctrl+MOpens Measure tool form
9Rotates selected object 45° counterclockwise
0Rotates selected object 45° clockwise
EscExits vector drawing and editing tools and closes the data entry form
RMBExits vector drawing and editing tools and closes the data entry form
SpacebarRe-opens the last vector creation form you used. This is very useful when using other forms in between each shape / text / dimension you create.
ZZoom – click top left and bottom right corners to zoom
EscExits zoom mode returning to Selection mode
Ctrl+FZoom to Fit Job
FZoom to Fit Material
F6Zoom to fit Material
F1Opens the Help File
F2Opens the 2D Drawing window
F3Opens the 3D Preview window
F4Opens the Snap Settings form
F5Refreshes the 2D window
F6Scales 2D view to fit material
F8Toggles between the Drawing and Modeling Tab
F9Center selected object in view
F10Opens the Alignment Tools form
F11Toggle Drawing Tab on
F12Toggle Toolpath Tab on
  ZenDesk keyboard shortcuts

 

Tab Navigation

F11Toggle Drawing Tab on
F12Toggle Toolpath Tab on
Ctrl+LOpens the Layers Tab
Ctrl+DOpens the Drawing Tab
F8Toggles between the Drawing and Modeling Tab

 

Double Sided Job Setup

1Toggle Top Side on
2Toggle Bottom Side on
=Toggle Multi-Sided View on

 

Mirror

HMirror Horizontally
Ctrl+HCreate Mirror Copy Horizontally
Shift+HMirror Horizontally, around center of material
Ctrl+Shift+HCreate Mirror Copy Horizontally, around center of material
VMirror Vertically
Ctrl+VCreate Mirror Copy Vertically
Shift+VMirror Vertically, around center of material
Ctrl+Shift+VCreate Mirror Copy Vertically, around center of material

 

Alignment

F9Moves selected object to the center of the material
F10Opens the Alignment Tools form

 

Group

GGroup: Creates a single group containing selected vectors / components
UUngroup: Converts a Group to individual vectors or components
Ctrl+UDeep ungroup the selected objects to their original layers.Sub-groups are also ungrouped
Ctrl+Shift+UDeep ungroup the selected objects to their groups layers. Sub-groups are also ungrouped

 

Node Editing

IInsert a Point
DDelete Point / Span
SSmooth / Unsmooth Point
CCut Vector opens the vector
BConvert span to Bezier
AConvert span to Arc
LConvert span to Line
PMakes the selected node the Start Point for machining
XDisplays a single node’s X and Y location properties
XChanges the X co-ordinate position of selected nodes to match the position of the first one (when more than one selected)
YChanges the Y co-ordinate position of selected nodes to match the position of the first one (when more than one selected)
HEnter Horizontal mirror mode (press again to exit)
VEnter Vertical mirror mode (press again to exit)
Ctrl+ZEdit Undo
Ctrl+YEdit Redo
Ctrl+CCopy the selected vectors
Ctrl+VPaste the selected vectors
CtrlandDragPastes a copy of the selected vectors each time the left mouse button is released.
Ctrl+XCut the selected vectors
AltandDragMoves the object either horizontally or vertically aligned with its original position
Ctrl+Altand DragCreates a copy of the original object horizontally or vertically aligned to its original position
Ctrl+NCreate New file
Ctrl+OOpen an Existing file
Ctrl+SSave file
Ctrl+IImport file
Page UpVertically tiles the 2D View and the 3D View window so you can see them both simultaneously. Currently Selected window is on the left – typically best to select the 2D View first when doing this
Page DownHorizontally tiles the 2D View and the 3D View window so you can see them both simultaneously. Currently Selected window is at the top – typically best to select the 2D View first when doing this
  Wrike keyboard shortcuts

 

Moving Objects According to Value

ValuethenEnterMoves object the L Value from original position in direction of cursor
Valuethen,thenValuethenEnterMoves object relative to its position by X and Y
ValuethenXthenValuethenYMoves object to the absolute position X and Y

 

Rotating Object According to Value

ValuethenEnterRotate the selection by R degrees counterclockwise

 

Node Editing As per Value

ValuethenEnterMoves node from original position by that amount in direction of cursor
Valuethen,thenValuethenEnterMove the node by that amount relative to its current position
ValuethenXthenValuethenYMoves node to the absolute position X and Y

 

Polyline Tool As Per Value

ValuethenEnterPlaces next point L away from the last point in the direction of cursor
Valuethen,thenValuethenEnterPlace the next point offset by that amount relative to the last point’s position
ValuethenXthenValuethenYPlaces the next point at position X and Y
ValuethenAthenValuethenLCreates a line with an angle of A° and a length L

 

Draw Circle

ValuethenEnterCreate a circle with the given radius
ValuethenDCreate a circle of Diameter D

 

Draw Ellipse

ValuethenEnterCreate a circle with the given diameter
Valuethen,thenValuethenEnterCreate an ellipse with width and height
ValuethenXCreate an ellipse with width X and use the current height
ValuethenYCreate an ellipse with height Y and use the current height

 

Draw Rectangle

ValuethenEnterCreate a sqaure with the given side length
Valuethen,thenValuethenEnterCreate a rectangle with given width and height
ValuethenXCreate a rectangle with width X and use the current height
ValuethenYCreate a rectangle with height Y and use the current height
ValuethenRthenValuethenXCreate a rectangle with a radius R and width X, using current height
ValuethenRthenValuethenYCreate a rectangle with a radius R and height Y, using current width
ValuethenWthenValuethenHCreate a rectangle with width W and height H
Valuethen,thenValuethenEnterCreate a rectangle with width and height
  QQ Player keyboard shortcuts

 

Draw Polygon

ValuethenEnterCreate a circle with the given radius
ValuethenDCreates a Polygon with diameter D
ValuethenSthenValuethenRCreate a polygon with number of sides S and radius R
ValuethenSthenValuethenDCreate a polygon with number of sides S and diameter D

 

Draw Star

ValuethenEnterCreate a star with the given radius
ValuethenDCreate a star with diameter D
ValuethenPthenValuethenRCreate a star with number of points P and radius R
ValuethenPthenValuethenDCreate a star with number of points P and diameter D
ValuethenPthenValuethenIthenValuethenRCreate a star with number of points P , Internal Radius % I and radius R
ValuethenPthenValuethenIthenValuethenDCreate a star with number of points P , Internal Radius % I and diameter D

Using This VCarve Pro Keyboard Shortcuts can help you be more productive.

So next time you’re sitting at your computer, take a few minutes to learn some of these essential keyboard shortcuts – your future self will thank you!

Was this article helpful?
YesNo

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.